Stationary Compactors

The most widely used dry-waste compactor in the industry. Used for recycling and so much more.

In a stationary compactor, the refuse is loaded into the hopper and compressed into a receiving container. This compaction option can reduce the volume of waste by up to 4 times! These machine units are installed permanently at your site and come in a variety of options. 

 

Ideal For:

  • Dry Trash

 

  • Cardboard

  • Paper

 

To discuss which stationary compactor would be best for your industry, fill out our online contact form or call us at (833) 233-9377.

 

225 And 225HD Stationary Compactors

The 225 Stationary Compactors are your best compaction value. Built for reliable performance in commercial and medium industrial situations, it effectively reduces solid waste material to a fraction of its original size. It is attractively priced and features a 56-second cycle time and powerful 55,100 lbs. (24.95 kg) maximum compaction force.

c166e0_8ff4c5183215497aa0ee7243ddaa8df8_

Key Features & Benefits

  • Heavier steel in key structural areas for heavy duty construction - charge box floor and ram face, 1⁄2" (12.7 mm) steel; ram top, 3⁄8" (9.52 mm) steel; sides, 1⁄4" (6.35 mm) steel plate.

  • Totally enclosed, fan-cooled motor. Quick release motor mount on the side-mounted power unit for easy servicing and maintenance

  • TRICON Fullness Assurance System eliminates all but one limit switch. It also produces better compaction ratios by making the ram remain against the trash, reducing spring back. TRICON offers better cold weather performance and extends the life of the compactor

225 HD Stationary Compactor

The 225 HD compactor is specifically designed for tough waste-disposal applications. Heavy duty features such as 1⁄2" (12.7 mm) steel plate charge box floor over four 4" (102 mm) steel channels; 1⁄2" (12.7 mm) ram face plate backed with 10" (254 mm) channels that incorporate T-1 placed in high-stress areas; 3⁄8" (9.52 mm) ram top supported by eight heavy duty formed cross members; and heavily reinforced charge box sides.

The 225 HD is ideally suited for industrial applications such as the disposal of skids and cartons and recycling OCC (old cardboard containers), paper, and similar materials. Electrical components, including the control box assembly, are UL® and CUL® listed. The 40 1⁄2" (1029 mm) x 60" (1524 mm) charge box is 33" (838 mm) deep to make disposal fast and easy.

275 And 275HD Stationary Compactor

The 275 Stationary Compactor is your best 2.5 cubic yard capacity compactor value. Built for reliable performance in commercial and medium industrial applications, it effectively reduces solid waste material to a fraction of its original size. It features a 60-second cycle time and a powerful 55,100 pounds (24,993 kg) of compaction force.

Engineered For Durability
The 275 is stress-engineered for durability. This means the strength is where it belongs – like the 1/2" charge box floor reinforced with five heavy-duty steel channels, the 1/2" plate ram face backed with 10" (254 mm) plus 6" (152 mm) structural channels, and the extra-rugged reinforced sides.

Key Features:

  • Produces 55,100 pounds of compaction force

  • Side-mounted power unit for convenience and ease of maintenance. It eliminates the need to go inside the compactor for most repairs

  • The 275 compactor features an advanced, simplified control system with two-button operation.

  • It's key-operated and fully automatic, and the heavy duty push button controls are contained in a weatherproof NEMA 4 enclosure. Connected to the power pack with 13' of sealtite, the controls can be located for operator convenience

  • Dual controls, Ozone Odor Control system, hoppers and many other options are available, as well as a full line of compaction containers

  • Chutes can be constructed to meet your specifications and needs. They reduce the risk of theft of valuable merchandise or tools by eliminating a person's ability to hide items in the trash in order to recover them later

275 XHD Stationary Compactor

Waste Equipment's 275 XHD produces more than 92,400 pounds (41.73 kg) of force, assuring top performance in heavy commercial and industrial applications. The 275 XHD is unique to other compactors in its class, providing a large 60" wide (1524 mm) by 52" (1321 mm) long clear-top opening and a 33" (838 mm) deep charge box – a convenient feature during peak loading times or when compacting bulky items.

Heavy Duty Design

  • The 275 XHD is stress-engineered for durability. This means the strength is where it belongs – like the 1/2" charge box floor reinforced with heavy-duty steel channels, 3/4" steel plate ram face backed with structural channels, and extra-rugged reinforced sides

  • Dual controls, Ozone Odor Control system, hoppers, and many other options are available, as well as a full line of compaction containers

  • Chutes can be constructed to meet your specifications and needs. They reduce the risk of theft of valuable merchandise or tools by eliminating a person's ability to hide items in the trash in order to recover them later

325 And 325 HD Stationary Compactors

The 325 stationary compactors is a proven workhorse with excellent capability, ensuring top performance in heavy commercial and industrial applications.

solid-waste-management-gallery-1.jpg

The 325 compactor is unique to other compactors in its class, providing a large 60" wide by 67 1/2" (1715 mm) clear-top opening and a 33" (838 mm) deep charge box – a key feature for peak loading times or when compacting bulky items.

Engineered For Durability

The 325 is stress engineered for durability. That means the strength is where it belongs – like the 1/2" (12.7 mm) charge box floor reinforced with seven heavy-duty steel channels, 1/2" (12.7 mm) steel plate ram face backed with 10" (254 mm) structural channels and extra-rugged reinforced sides.

Key Benefits and Features:

  • Allen-Bradley motor starter

  • Totally enclosed, fan-cooled motor

  • Quick release motor mount for easy servicing and maintenance

  • TRICON fullness assurance system, a time-shifting device that eliminates all but one limit switch. It also produces better compaction ratios by making the ram remain against the trash, reducing spring back. TRICON offers better cold weather performance and extends the life of the machine

325 HD Compactor

The large 59 1/2" (1511 mm) wide by 67 1/2" (1715 mm) long clear-top opening and superior strength of the 325HD make it just right for large volumes or crates, skids, and other hard-to-compact industrial refuse. Waste is crushed to a fraction of the original bulk.

Heavy-Duty-Design

Waste Equipment's 325 HD is engineered with extra steel to meet the demands of heavy-duty industrial use. Cylinder supports, a 1" (25.4 mm) thick breaker bar, a 3/8" (9.52 mm) ram top, and extra side supports are added for superior endurance. Also standard on the 325 HD are 1/4" (6.35 mm) thick steel charge box liners and a 1/2" (12.7 mm) thick abrasion-resistant steel plate on the charge box floor.

450 Stationary Compactor

The 450 compactor from Waste Equipment features an extra-large 60" (1524 mm) by 67 1/2" (1715 mm) clear-top opening that accepts large, bulky items with ease. 

rj450.jpg

Ruggedly built to meet the challenge, this unit packs a powerful 56,500 (25,628 kg) pounds of crushing force. And the 450 compactor is built for performance and reliability as only Waste Equipment, the solid waste industry’s specialist in on-site compaction systems can provide.

Industrial Grade Systems

The 450 compactor features industrial-grade electrical and hydraulic systems that are UL® and CUL® Listed. This means trouble-free operation and top performance year after year. Waste Equipment’s side-mounted power unit combines the convenience and ease-of-maintenance that comes with a remote power pack with the space savings and ease-of-installation of an integrated power pack.

Cart Dumpers, Chutes, And Hoppers

Every 225 Ultra series compactor comes standard with a watertight seal that is fully tested prior to leaving the factory. Liquid retention is ensured by the Waste Equipment Double-Hinge. It creates uniform seal compression while eliminating the seal “scrubbing” and damage so often encountered with competitive designs. The Double-Hinge also saves expensive driver and truck time because only one easy-to-operate ratchet makes it work.

Key Features and Benefits:

  • Side-mounted power unit

  • Power unit weather cover

  • Control panel box

  • Motor starter reset button

  • Limit switch

  • Ram

  • Ram guide shoes with replaceable wear strips

500 And 500HD Stationary Compactors

The 500 & 500HD stationary compactors are designed to handle heavy duty waste streams. They are ideal for small transfer stations or municipal drop-off centers. The heavy-duty design and high-compaction force yield excellent volume reduction with MSW and light C&D waste streams.

500 Stationary Compactors

​​Waste Equipment's 500 compactor is a real workhorse. Its proven capability assures top performance in heavy commercial and industrial applications. The 500 is unique to other compactors in its class, offering a large 60" (1524 mm) wide by 82.5" (2108 mm) long clear top opening and a 33" (838.2 mm) deep charge box – a handy feature during peak loading times or when compacting bulky items.

Engineered For Durability

The 500 series is stress engineered for durability. This means the strength is where it belongs – like the 1/2" charge box floor reinforced with seven heavy-duty steel channels, the half- inch plate ram face backed with 10" (254 mm) plus 6" (152.4 mm) structural channels, and the rugged reinforced sides.

500HD Compactors

The large 59 1/2" (15011.3 mm) wide by 81" (2057.4 mm) long clear-top opening and superior strength of the 500HD compactor make it just right for large volumes or crates, skids, and other hard-to-compact industrial refuse and trash. Waste is crushed to a fraction of the original bulk.

Heavy Duty Design

​​Waste Equipment's 500HD is engineered with extra steel to meet the demands of heavy-duty industrial use. Cylinder supports, a 1" (25.4 mm) thick breaker bar, a 1/2" (12.7 mm) ram top and extra side supports are added for superior endurance. Also standard on the 500HD are 3/8" (9.52 mm) thick steel charge box liners and a 1/2" (12.7 mm) thick abrasion-resistant steel plate on the charge box floor. The 500HD comes standard with a 1/2" (12.7 mm) AR400 tongue-and-groove floor, as well as a remote power unit. An optional side-mount power unit is available.

Cart Dumpers, Chutes, And Hoppers

The 500 and 500HD compactors can be fitted with a variety of material handling equipment such as chutes, hoppers, and dumpers.

550 Stationary Compactor

Waste Equipment’s 550 series stationary compactors are designed to handle heavy duty waste streams and are ideal for small transfer stations or municipal drop-off centers. Its heavy-duty design and high-compaction force yield excellent volume reduction with MSW and light C&D waste streams.

Waste Equipment's 550 series compactor is a real workhorse. Its proven capability assures top performance in heavy commercial and industrial applications. The 550 is unique to other compactors in its class, offering a large 60" (1524 mm) wide by 97" (2464 mm) long clear-top opening and a 39" (991 mm) deep charge box – handy features during peak loading times or when compacting bulky items.

Engineered For Durability

​​The 550 compactor is a high-capacity, heavy-duty compactor ideal for industrial and commercial applications where large volumes of solid waste are generated. Its rugged construction and large hydraulic power unit allow maximum compaction performance. The 550's large clear-top opening can accommodate oversized crates and cartons.

The 550 is solidly reinforced with 4" I-beams throughout. The sturdy ram has a 1/2" (12.7 mm) face plate. The sides are constructed of 1/4" (6.35 mm) thick steel supported by 14 vertical angles with 1" (25.4 mm) by 4" (101.6 mm) bar running horizontally on each side of the charge box area for increased rigidity and strength. The tough 1" (25.4 mm) by 8" (203.2 mm) by 6" ( 152.4 mm) angle breaker bar easily handles the challenges of daily industrial trash.

Transfer Station Applications

The 550 is also designed for residential collection vehicles serving transfer station applications for municipalities and private contractors. A conveniently located 550 transfer facility will eliminate the need for unnecessary trips to the landfill by intermediate collection vehicles, resulting in fuel, maintenance, and labor cost reductions. Compaction into large compaction containers or transfer trailers may also reduce dumping fees.

Cart Dumpers, Chutes, And Hoppers

The 550 can be fitted with a variety of material handling equipment such as chutes, hoppers, and dumpers.

575 Stationary Compactor

The 575HD Stationary Compactor is designed to handle heavy duty waste streams and is ideal for small transfer stations or municipal drop-off centers. Its heavy-duty design and high-compaction force yield excellent volume reduction with MSW and light C&D waste streams.

575 Stationary Compactor Features

Waste Equipment's 575HD stationary compactor is a high-capacity, heavy-duty compactor ideal for industrial and commercial applications where large volumes of solid waste are generated. Its rugged construction and large hydraulic power unit allow maximum compaction performance. The 575HD features a large 95-inch (2413 mm) by 59 1/2-inch (1511.3 mm) clear-top opening to accommodate oversized crates and cartons.

Engineered For Durability

The high-capacity 5.5 cubic yard 575HD is ideal for heavy industrial applications. The large hydraulic power unit and oversized clear-top opening make it well suited for high volumes of pallets, crates and other bulky solid wastes.

  • 4-inch (101.6 mm) I-beam reinforcement throughout

  • Heavy duty ram with 3/4-inch (19.05 mm) steel face plate and 3/8-inch (9.53 mm) top

  • Cast iron ram guides for extended floor life

  • Sides constructed from 1/4-inch (6.35 mm) thick steel with 3/8-inch (9.53 mm) liner plates

  • 4-inch (101.6 mm) by 5-inch (127 mm) boxed channel vertical side supports

  • Hefty 6-inch (152.4 mm) by 8-inch (203.2 mm) by 3/4-inch (19.05 mm) angle breaker bar with 1-inch (25.4 mm) by 12-inch (304.8 mm) steel plate reinforcement that easily handles the challenges of daily industrial trash

Cart Dumpers, Chutes, And Hoppers

The 575HD can be fitted with a variety of material handling equipment such as chutes, hoppers, and dumpers.

Transfer Station Applications

The 575HD is designed for transfer station applications for municipalities and private contractors. A conveniently located 575HD transfer facility will eliminate the need for unnecessary trips to the landfill by intermediate collection vehicles resulting in fuel, maintenance, and labor cost reductions. Compacting into large compaction containers or transfer trailers could also help to further reduce dumping fees.

 

NOTE: Due to the high forces of the 575HD, extra heavy duty model compaction containers are required.