top of page
  • Writer's pictureWERS

Cardboard Baler Installations

Updated: Aug 16, 2019

  1. Select location for new unit to be placed. Make sure there is enough room on all sides of the unit for safety and serviceability.

  2. Place unit in location and secure to the concrete with anchors.

  3. Connect electrical to customer supplied disconnect.

  4. For a baler – Raise the cylinder and install into it’s operational position

  5. For a compactor – Install any necessary safety switches on feed doors etc.

  6. Check all fluid levels, grease unit, make sure unit is in proper operating order

  7. Check all safety related switches and stop buttons.

  8. Give customer brief tutorial on machine

  9. Clean up area and that is all:)

76 views0 comments

Recent Posts

See All
bottom of page